Characterized by high hardness, extra fine granulometry, low expansion and fast setting time.
Ortotypo4 is often used with acrylic resins (both hot or cold polymerization processes) with unaltered surface and no models’ breakage risks .
It is compatible with all impression material and all products for the isolation of plaster against plaster.
Final color: Brilliant white.
• Water/powder ratio: 22 ml/100 g
• Imbibition time: 20’’
• Manual mixing time: 60’’
• Mechanical mixing time: 30’’
• Pouring time: 3’
• Setting time: 7’
• Time for separation after setting*: 30’
• Setting expansion (after 2 hours): 0,08%
• Compressive strength (after 24 hours): 103 MPa – 14.927 Psi – 1.051 Kg/cm2
• Rockwell hardness (after 24 hours): 95 HRl
Measurements at 23°C with deionized water.
* Depending on the impression material used, the times indicated may vary.
PACKAGING
TOR425 – 1 x 25 kg bucket